Material: ABS Plastic
Pet Size: Medium
Operation: Install Easily
Feature: Give Freedom to pet come
Design: Auto Locking System Magnetic Closure
Opportunity: Home, Garden
installation instructions
Tools Required:Pencil,Ruler,Jigsaw,Drill,Square,Screwdriver,Tape measure
Step1
Cut out the template provided and position on the door ensuring it is in the center of the door.To determine the height of the hole measure the belly height of your pet(Average installation height is 10-15cm from bottom of door).Position the template on your door and outline the template with a pencil and ruler ensuring you draw straight lines using a square, if the position of the template lines is suitable then remove door from hinges and place on sawhorse to arrange cut out of pet door opening
Step2
Before cutting out the opening drill pilot holes in each corner.Using a 12mm timber drill bit drill out the pilot holes in each corner .Then using a jigsaw start cutting from one corner following the template line to each corner until the opening is cut out
Before fitting the pet door,temporarily place the pet door with its frame cover on the exterior of the door.This will allow you to mark screw holes so they line up with the frame cover. Remove the pet door and drill the holes. Check the length of the screws against the width of the door to ensure that 4 pieces plastic sheets on the inside of the pet door to cover the hollow openings inside the door. Position the pet door into place and then tighten the screws using a screwdriver
Transparent, solid plastic flap is easy for your pet to open
The Manual can be quick and easy installation
Low Maintenance and Durable
Frame Dimensions: 34*28*2.2cm (13.38*11.02*0.87inch)
Type: Locking Flap Door
Reviews
There are no reviews yet.