HQRP 4-Pack Foam Pre-Filter for Drinkwell Stainless Steel 360, Ceramic Avalon, Lotus, Pagoda, Sedona Pet, Multi-Pet Fountains; PAC19-14089 Replacement

Using filters properly and changing regularly, they help keep the water cleaner and fresher, while extending the life of your Pet Fountain. Filters may be rinsed out when the Pet Fountain is cleaned. Filters are an added feature of the Pet Fountain. Using the filters is not required for normal operation.

Place the Foam Filter around the Pump. The rounded side of the Foam Filter should be directly in front of the Faceplate on the Pump. Make sure the electrical Power Cord runs over the top of the Foam Filter, not underneath it, as this will keep the Foam Filter in place.

Replace the Foam Filter every four to six weeks, depending on the location of the Pet Fountain and the number of pets using it. If you do not intend to replace the filter at the time of cleaning, rinse the Foam Filter thoroughly with fresh water.

Never wash the filters with soapy water, as the soap residue will seep into the filters and cannot be removed. Only rinse the filters with water.
HQRP® 2-Pack Foam Pre-Filter Replacement;
Compatible with Drinkwell PAC19-14089; Stainless Steel 360, Ceramic Avalon, Pagoda, Sedona Pet, Multi-Pet Fountains;
Dimensiones: 3″ x 2.7″ x 1.2″ / 75 x 68 x 30mm;
The Foam Filter collects hair, debris and pet food before they reach the pump.
[amz_corss_sell asin=”B01DUNRT0C”]