Product Description
Pets electrostatic isolation blanket to make your pets away from the area you want to protect, such as a kitchen, sofa, dining table bedroom, baby activity area and other places, to prevent further damage.
ATTENTION
◆ Care and Cleaning
1. Remove the static blanket controller, mats could wash in water with soap. Once dry, reinstall the control.
DO REMEMBER KEEP THE electronic controller IN DRY.
2. Put a soft cloth or towel between the car surface and the electrostatic pad blanket.
◆Storage Notes
When not in use, we recommend that you removed the battery out from the electrostatic pad controller.
◆ Cleaning Notes
Control box must not get wet, it will affect product performance.
◆ Solution for the mat doesn’t work
LED light is not on:
● Check whether the electrostatic blanket is switched on.
● Check whether the static blanket mounted a 9-volt battery, and ensure the correct connected to the control box.
● Change a new battery.
Blanket does not detect my pets, but LED indicator switch is turned on:
● Follow the procedure “static test blanket” to have a test
● Control box may be loose. Unplug the control box, check whether the bolt connection problem, put it back and try it again.
● Your pet’s feet may have too much hair static electricity caused by the blanket is not triggered. Trim excess fur, exposing pet paws.
● If the mat wet, dry and try again.
● Change a new battery.
Electrostatic blanket no shows “on” state
● Check the battery is correctly placed control box, keep them not being loose.
● Check the controller is firmly stuck in the electrostatic pad.
Safely and effectively trains your pets to stay away from certain areas.
Responds to your pet’s touch with harmless low-power 3-second static pulse.
Suitable for cats and dogs of all sizes.
Runs up to 6 months or 10,000 activations on single 9-volt battery (sold separately).